Do you ever find yourself needing to remove a stubborn stripped or degraded screw, but don’t have the right tools? If so, rejoice – SpeedOut is here to save the day! Created by two brothers determined not to let their project get ruined by one damaged screw, SpeedOut was designed specifically for those tough screws that require extra power and force.
Not only will this tool give you peace of mind in knowing you can remove your difficult screws with no damage done – it will also save time and make your projects go faster. Read this article on how to use speedout screw extractor to learn everything there is to know about using a SpeedOut Screw Extractor.
What is How to Use Speedout Screw Extractor?
SpeedOut is a tool specifically designed to remove stripped, rusted, or otherwise stuck screws and bolts. It features two heads: one with a set of teeth that grip the head of the screw, and one with a drill bit that drills into the damaged screw head. This powerful combination allows you to loosen and unscrew any stubborn screw without damaging it – or worse, your project.
Safety Precautions:
Before you start using your SpeedOut Screw Extractor, it’s important to take the necessary safety precautions. Make sure to wear protective eyewear, and keep the tool away from any flammable materials. Be sure to use your SpeedOut Screw Extractor in a well-ventilated area and always follow the manufacturer’s instructions.
11 Step-by-step Instructions on How to Use Speedout Screw Extractor
Step 1: Gather Needed Supplies
You’ll need the following:
- Speed out Screw Extractor
- A Power Drill With the Appropriate Bit Size for the Screw Head
- Protective Eyewear
Step 2: Put on Protective Eyewear
Safety first! Make sure you can see any particles that the drill may kick up while in use. It is important to wear safety glasses throughout the entire process. It is also advised to wear a dust mask if you are working in an area with poor air circulation. But, please remember to read and follow the manufacturer’s instructions.
It is always best to be prepared and exercise caution. If you are not sure about a safety precaution, always consult the manufacturer.
Step 3: Set Up Your SpeedOut
Attach the appropriate bit size to your drill and then attach the SpeedOut Screw Extractor to the other end of the drill. If you are not sure what bit size to use, consult the manufacturer’s instructions. It is important to make sure all components are securely attached before proceeding.
But, if you are working with a screw that has already been damaged, it is best to use the smallest bit size possible.
Step 4: Position Yourself Properly
Make sure you are positioned in a way that allows you to have ample control over your movements while using your SpeedOut Screw Extractor. This means getting close to the screw you are trying to remove.
Positioning yourself properly will help you maintain full control over the drill and is important for safety. This will also help you to ensure that you are applying the right amount of pressure.
Step 5: Align Bit with Screw Head
Position the bit so that it is perfectly aligned with the screw head, making sure to keep pressure on it so that it does not slip out of place. If necessary, use a small mallet or hammer to get it into position if needed. However, you should always be careful not to apply too much pressure, as this could cause damage to the screw and affect the outcome of your project.
It is important to be precise in order to ensure a successful extraction. It is also important to remember that the bit should only be used for drilling into soft materials; it should not be used on metal or other hard substances.
Step 6: Activate Drill
Slowly start the drill and let it gain momentum. Be sure to maintain steady pressure on the SpeedOut Screw Extractor, as too much force may cause it to slip out of alignment with the screw head. Although this tool is designed to loosen a screw, it may take some time and force depending on the size of the screw and its condition. You may need to use a bit of force, but be careful not to overdo it.
Step 7: Let Drill Do Its Work
Let your drill do its work! It should take about 10-15 seconds before the screwhead has been drilled through by the bit. This is an important step as it will help loosen the screw, allowing you to extract it with ease.
It is important to remain patient and not rush the process, as this could cause damage to your screw or project. But, if the screw is still not loosening after 15 seconds, it is best to stop and consult the manufacturer’s instructions.
Step 8: Remove SpeedOut
Once your drill has finished drilling, you can remove the SpeedOut from your drill and set it aside. The bit should be firmly attached to the damaged screw head at this point.
It is now safe to move on to the next step. It is important to remember that if the bit has not managed to loosen the screw, do not force it out. This could cause further damage to the screw and project. If the bit has not managed to loosen it, consult the manufacturer’s instructions.
Step 9: Loosen the Screw
Now that your SpeedOut has done its job, you can use your hand to loosen the screw. It is important to make sure that the screw is not stuck in place and can be easily removed by hand.
If you have difficulty, please consult the manufacturer’s instructions. Otherwise, use your hand to turn the screw counterclockwise until it comes out. Buying a power drill or screwdriver with the appropriate bit size could make this process easier.
Step 10: Activate Drill
Start up your drill once again, using steady pressure to ensure proper alignment throughout the process. This should only take about 5 seconds until the screw head has been loosened. You should now be able to Remove the Screw With Ease.
It is important to remember that if the screw still won’t loosen after 5 seconds, you should stop and consult the manufacturer’s instructions. It is best not to force the screw out, as this could cause further damage.
Step 11: Remove the Screw
With the bit still firmly attached to the screw head, you can now pull out both pieces from their respective places. Congratulations – you have successfully used a SpeedOut Screw Extractor! Be sure to clean off any lingering debris before moving on to another project.
But remember to keep the SpeedOut Screw Extractor in a safe place for future use. Always consult the manufacturer’s instructions for proper storage and maintenance.
Following these 11 steps on how to use Speedout Screw Extractor is easy and straightforward. Once you’ve tried it out for yourself, you’ll be a pro in no time! Before long, you’ll be able to remove those stubborn screws with ease – no matter how challenging the project. Good luck and happy unscrewing!
Do You Need to Hire a Professional?
If you find yourself in a situation where you need to remove a particularly difficult screw, it may be wise to hire a professional. A professional can help you make sure that the process is done correctly and safely, and can also provide you with any additional tools or supplies that may be necessary. Remember – safety should always come first!
Frequently Asked Questions
Q: What is a SpeedOut Screw Extractor?
A: A SpeedOut Screw Extractor is a tool designed to remove stripped, rusted, or otherwise stuck screws and bolts. It features two heads – one with a set of teeth that grip the head of the screw, and one with a drill bit that drills into the damaged screw head.
Q: How Long Does It Take to Remove a Screw Using Speedout?
A: Generally speaking, it takes about 10-15 seconds for the drill to drill through the screwhead, followed by another 5 seconds for the speed out to loosen it up. All in all, you should be able to remove most screws with your SpeedOut Screw Extractor within 20-25 seconds.
Q: Should I Hire a Professional to Remove Difficult Screws?
A: If you find yourself in a situation where you need to remove a particularly difficult screw, it may be wise to hire a professional. A professional can help make sure that the process is done correctly and safely, and can also provide you with any additional tools or supplies that may be necessary.
Q: Where Can I Buy a SpeedOut Screw Extractor?
A: SpeedOut Screw Extractors can be found at most hardware stores, home improvement centers, and online retailers. Be sure to read reviews before purchasing to make sure you’re getting the best product for your needs.
Conclusion
All in all, the process of using a Speedout screw extractor for a damaged or stuck screw can be done quickly with minimum effort. With the proper equipment and correct steps in place, removing a phased-out screw should pose no issue.
Furthermore, users should ensure that safety is at the top of their priority list by wearing protective gloves when performing the extraction. Now that you’re equipped with information on how to use Speedout Screw Extractors, why not explore some other topics such as how to vent a basement bathroom?
Venting basements properly can minimize harmful pollutants from entering your home – getting you one step closer to achieving healthy and breathable indoor air quality.
You Can Check It Out to Remove a Screw With Loctite
