How to Hang an Axe

Do you have a prized axe or hatchet gathering dust in your garage or shed? If so, why not hang it up for display and appreciate its beauty? Hanging an axe is a great way to both show off your antique axes and make sure the sharp edges are out of reach from any curious kids. 

How to Hang an Axe

By following some simple instructions, you can quickly learn how to hang an axe safely and securely. So grab that dulled blade and get ready to spruce up that wall with an impressive new addition!

Tools You Will Need

  • Hammer
  • Picture hanging nails
  • Level

6 Steps Guide on How to Hang an Axe

1. Select a Location on the Wall

When it comes to selecting a location on the wall to hang your axe, consider the safety of yourself and others around you. Make sure its placement is not too high or low, so that neither you nor anyone else accidentally knocks into it. Consider the amount of foot traffic in the area. 

Find somewhere safe where people won’t walk right into your precious weapon. Of course, this also means that access to your axe should be as easy as possible. Make sure there’s plenty of room above and below it so you can easily reach it when necessary.

Your axe should be hung in a place that feels comfortable – ultimately, you’ll want to ensure that both convenience and safety are taken into account at all times!

2. Hang the Axe in an Even Position

Making sure you hang your axe in an even position is an important step when putting it up for storage. Using a level can help you ensure that the axe is properly hung and that it is balanced on both sides. 

To use a level, affix one end of the level to the wall where you want to hang your axe. Then move it along the wall until it is in line with the handle. 

If the bubble does not rest in the very center, adjust either side of the handle until it rests between two lines on the bubble indicator. 

This indicates that your axe is now correctly leveled to be mounted on your wall.

3. Mark the Points

Identify the Wall

Hanging an axe onto a wall may seem like a simple task, but it’s important to plan carefully to ensure it is securely and safely attached. Before getting started, identify the wall studs that will support the weight of the axe. Mark two points on the wall approximately six inches apart – this will be where you drill your holes for attaching the anchors. 

Use a level to ensure that the marked spots are exactly parallel to each other before drilling. Once you have drilled your holes, insert and secure your anchors, apply the adhesive with appropriate instructions if necessary, then hang your axe! Following these steps will guarantee your axe stays on the wall without incident.

4. Securely Anchor Into the Wall

To properly hammer picture hanging nails into the wall, first, locate the two marked points. You may need to use a level to get them aligned correctly, or you can use a tape measure if necessary. 

When you are happy with the position of the marked points and ready to hang your picture, hold the nail steady against the wall and tap it gently but firmly with a hammer until it is securely anchored in sufficient depth. 

Check for stability after each strike, repeating as needed until the nail is thoroughly embedded in the wall, then move on to punching in the second nail. This should create enough stability for your axe without risking any damage from over-hammering.

5. Place the Axe on the Nailed Points

Hanging an axe on the wall is an important process when it comes to properly storing this tool. To do it correctly, you will need two nails and your axe. Place the blade of the axe head facing downwards towards the floor and line up each nail with the eye of the axe head. 

Make sure the intended angle looks pleasing to you before hammering in the nails and securely hanging your axe up on the wall. When you are finished properly hanging a heavy-duty axe through proper nailing, you can rest assured that it will remain secure and safely out of reach until its next use.

6. Tighten the Screw

Securely hanging an axe is essential for ensuring a safe, organized workspace. To do this, the first step is to tighten the screw at the back of the handle. This will minimize any movement when handling or transporting your axe. 

Tighten the Screw at the Back

Utilizing this simple step will ensure that you have increased control over your axe, helping to reduce the risk of accidentally dropping it or injuring yourself and others while using it. Taking the time to properly secure your axe can assist in keeping injury prevention top of mind in any workspace environment

And that’s it! You’ve now successfully hung your axe on the wall. Display it proudly and safely in whatever space you choose, and remember to check that all nails are secured from time to time for added safety. 

Be sure to thank the axe for its service by giving it a polish now and then. Congratulations on your new wall art!

Tips to Hang an Axe

  1. The first step is to find the perfect spot to hang your axe. You want to make sure that it is in a place where it will be easily accessible, but out of the way of foot traffic. A good spot might be next to the door of your workshop or shed.
  2. Once you have found the perfect spot, use a tape measure to find the center of the area. This will be where you will drill your hole for the hanger.
  3. Drill a hole that is slightly smaller than the diameter of the hanger you will be using. The hanger should fit snugly in the hole so that it does not come loose over time.
  4. Insert the hanger into the hole and secure it in place with a few screws. Make sure that the screws are tight so that the hanger does not come loose.
  5. Hang your axe on the hanger and make sure that it is securely in place. You don’t want it to fall and injure someone!
  6. Once your axe is hung up, you can use a sharpening stone to keep the blade in good condition. It is important to keep the blade sharp so that it can perform its best when you need it.
  7. If you are not going to be using your axe for a while, it is important to store it properly. Wrap the head of the axe in a cloth or towel to protect it from scratches and moisture damage.
  8. When you are ready to use your axe again, make sure that you take it down from the hanger carefully. Hold onto the handle with one hand and support the head of the axe with the other hand as you remove it from the hanger.

How to Securely Hang Your Axe for Safety and Organization?

Securing your axe with proper storage and organization practices is paramount to ensure safety while working with your axe. The most secure way to hang an axe is by looping a properly secured rope through the handle; make sure to reinforce the loop and knot to prevent it from slipping off with regular use. 

For extra precaution and stability, attach a carabiner at the far end of the rope for further security. Make sure that you hang your axe away from any bare walls, as not doing so can lead to blades getting chipped or damaged over time. 

Finally, if there are multiple axes in your garage or shed, clearly label them each so you don’t mix up blade types and edges when selecting an axe for each job. With these steps in mind, you can be sure that your axes will stay safe and organized even when they’re out of use.

Label Them Each

How to Maximize Efficiency?

Whether you are an avid outdoorsman or a hobbyist, learning how to properly hang an axe is an essential skill to maximize your efficiency. When the axe is hung in the right spot, it can be easily accessible while also being kept safely out of the way when not in use. 

For starters, make sure that the axe head is positioned up high so it hangs securely with nothing in its way. Make sure the wall you attach it to is strong and firmly secured into studs or other structural supports; avoid hanging your axe onto drywall or plaster as these will not last for long. 

As for what type of hanger or hook to use, the everyday finding will do just fine so long as they are large enough and sturdy enough for carrying the weight of the axe head. 

Finally, consider adding some adhesive strips or glue on the bottom of the axe head and inside the hanger’s cradle to ensure a tight grip and prevent it from slipping off. With these guidelines in mind, you should have no problem hanging your axe efficiently and effectively.

Consider Adding Some Adhesive Strips


Now that you know how to hang an axe, be sure to practice safe ax handling and always use caution. With the proper technique, you will be able to enjoy your newly hung axe for many years to come. Thanks for reading and happy chopping!

Photo of author

Enrique Howard

Hi, I am Enrique. I started my professional life as a handyman and did a lot of external and internal repair of home and office with a little bit of electric and plumbing support. I have extensive experience in tools testing such as drilling, turning, milling, and non-conventional machining like EDM. So let me help you on your journey towards becoming an enlightened DIYer with amazing tools that you can use on your project.

Leave a Comment