How to Cut Bricks With a Circular Saw

Have you ever wanted to work with bricks and stones in a DIY project but felt unprepared? Maybe it seemed like a task beyond your capabilities. Due to the specialized tools needed. But what if we told you that all you need is an accessible tool in most workshops: a circular saw? It sounds too good to be true, doesn’t it? It is important to know how to cut bricks with a circular saw. 

How to Cut Bricks With a Circular Saw

You may have never considered using this kind of equipment on masonry material before – yet here we are introducing how simple and easy cutting through brick can be with just one make-shift blade transformation. Read our guide below for details on how any handyman or homeowner can quickly cut through brick walls, rocks, blocks, and more.

Tools You Will Need

  • Circular Saw
  • Masonry Cutting Blade
  • Safety Glasses and Gloves
  • Ear Protection (Optional)
  • Tape Measure or Ruler
  • Pencil or Chalk for Marking

8 Steps Guide on How to Cut Bricks With a Circular Saw

1. Assemble the Circular Saw With a Masonry Blade

Before attempting to cut bricks with a circular saw, always remember to wear the safety gear provided. Make sure you have all parts necessary for its assembly and that you read through the instructions carefully before beginning. Once assembled properly, make sure you’re in a well-ventilated area and start cutting from one end of the brick towards the other. 

This will ensure that your saw doesn’t get clogged or overly taxed during the process. You should also prioritize using even pressure throughout to obtain neat, accurate results. Take regular breaks if need be to avoid fatigue or injury. With proper preparation and maintenance, cutting bricks with a circular saw can be simple and rewarding.

Pressure Throughout to Obtain Neat

2. Place the Brick or Block

Cutting bricks or blocks with a circular saw may seem intimidating, but with the right equipment and preparation, it can be achieved easily. Place your brick or block in question on a flat surface such as concrete or wood before beginning. Make sure it firmly stays in place so that the cutting process is accurate and efficient. 

Not only will this make the process easier, but it will also avoid any safety hazards by ensuring that the brick is not moving during the use of the circular saw. By following these simple steps and starting small, you’ll soon be an expert at safely cutting bricks for any project!

3. Measure Out the Area

Before you get anywhere near a circular saw, it’s important to make sure you have accurately measured out the area. That means grabbing your trusty tape measure or ruler to mark an outline of the exact area you want to cut. Don’t skimp on this step, as accuracy is key when getting satisfactory results with a circular saw. 

Make sure to take multiple measurements and double-check your work before continuing. Having accurate measurements will ensure you can easily Cut Bricks With a Circular Saw and get the right result!

4. Cut Through the Brick/block

Taking the time to mark a cutting line on your brick or block with either a pencil or chalk can make all the difference when you’re using a circular saw to cut bricks. This will enable the saw to stay within the desired area and ensure that your cuts are symmetrical and neat. 

Also, always remember to wear safety glasses and hearing protection for safety purposes — those blades can move fast! With these tips in mind, you’ll be able to achieve professional-level results with ease.

5. Turn on the Circular Saw

Using a circular saw to cut bricks can be a tricky but necessary task in some instances. Before you begin, make sure the saw is on a low-speed setting for better control and accuracy when making the cuts. 

Once the speed is set, carefully guide the blade through the brick with slow movements to achieve the desired results. This will help ensure that all cuts are accurate and reduce any mistakes or safety hazards that may arise from haste or recklessness. With patience, precision and practice, you will soon master cutting bricks with a circular saw.

6. Increase the Speed of the Saw

Cutting bricks with a circular saw requires precision and skill. Start the saw at a low speed, ensuring that it is cutting straight and making even cuts in the brick. Gradually increase the speed of the saw as you make your way through the brick, keeping a steady hand to ensure accuracy. Be sure to wear protective eyewear and gloves when cutting bricks as debris may fly out during the process. 

Adjusting the cutting depth is necessary when making certain cuts, to avoid cutting too far into any area of the brick. If you need to make sharp angles or intricate designs in your cut, then readjust the saw blades and set them according to your preferences. Remember to stay focused and work slowly when using a circular saw on a brick for clean, precise results!

Adjusting the Cutting Depth is Necessary

7. Turn Off and Unplug the Saw

A circular saw is a time-saving and valuable tool for any homeowner or contractor. While it’s best used to cut lumber, a quality blade can also be used to make precise cuts into bricks. To ensure the highest level of safety and accuracy, be sure to adjust the saw’s depth to match the brick’s thickness and get it up to its maximum speed before beginning. 

And once your cut is complete, always remember to turn off and unplug the saw before carefully removing any debris or dust created during cutting. Doing so will help you avoid injuries that can come from handling sharp edges and particles around the blade area.

8. Remove Any Dust or Particles

When cutting bricks with a circular saw, make sure to take the necessary safety precautions. Before beginning any cutting, make sure to wear protective glasses, gloves, and adequate footwear so you can avoid any unnecessary risk. Additionally, you’ll want to mark the area of your brick that you are planning to cut with a chalk or pencil line. 

Make sure the saw blade’s guard is secured while doing the cutting. After everything is complete, use a brush or vacuum to clear away any dust or particles left on the surface before discarding anything properly. Taking all these steps into account will ensure that everything runs smoothly as you cut bricks with your circular saw!

Happy cutting!

Tips on Cutting Bricks With a Circular Saw

  1. The first step in cutting bricks with a circular saw is to choose the right blade. A standard wood-cutting blade will not work for this task, as it will quickly become dull and will not be able to make clean, straight cuts. Instead, you will need to use a masonry blade, which is specifically designed for cutting through brick and other hard materials.
  2. Once you have the right blade, you will need to mark your cut line on the brick. You can do this with a pencil or a chalk line. Be sure to make your line as straight as possible, as this will make it easier to follow when you are making your cut.
  3. Next, you will need to set up your saw. Make sure that the blade is properly installed and that the saw is securely mounted on a table or other surface. If you are using a handheld saw, be sure to have someone help you hold it steady while you are making your cut.
  4. When you are ready, start the saw and slowly guide it along the cut line. Apply gentle pressure to the saw as you are cutting to avoid chipping or breaking the brick. If possible, try to keep the saw moving at a consistent speed to ensure an even cut.
  5. One of the most important tips for cutting bricks with a circular saw is to take your time and cut slowly. This may seem counterintuitive, but going too fast will only increase the chances of making a mistake and ruining your brick. So, take your time and focus on making a clean, straight cut.
  6. Another important tip is to let the saw do the work for you. Don’t try to force it through the brick; instead, let the blade do its job and guide it smoothly along the cut line. Applying too much pressure will only make it more difficult to control the saw and could result in an uneven or jagged cut.
  7. Once you have finished making your cut, be sure to clean up any debris that has been created.
Try to Keep the Saw Moving

How to Make Straight Cuts with a Circular Saw When Cutting Bricks

Making straight cuts when working with bricks can seem intimidating at first, but it doesn’t have to be! When using a circular saw, the key is to secure the brick you’re working with firmly in place.

Attach clamps or some other form of securing set-up that allows for your saw blade to cut right through your material with maximum control. Double-check that the pressure and tension on your clamps are ensuring an even and secure surface as well. 

Before cutting, simply place the saw blade against the edge of the material and then make a single straight cut in one pass. Keep in mind that circular saws can generate a lot of heat, so always make sure to use caution when cutting any kind of surface. With these helpful steps, you’ll have those bricks looking beautiful in no time!

The Saw Blade Against the Edge


‘So there you have it, a guide on how to cut bricks with a circular saw. This method is quick, easy, and relatively dust-free, making it ideal for both indoor and outdoor use. Whether you’re doing some general home renovations or working on a specific project, this guide will help you get the job done right.

​You Can Check It Out to How to Stop Ratchet Straps from Vibrating

Leave a Comment