How to Change a Circular Saw Blade Craftsman

Are you looking to take your carpentry skills to the next level? Knowing how to change a circular saw blade is essential for taking on bigger projects. It is important to know how to change a circular saw blade craftsman. Doing it correctly will help ensure a safe and smooth cut every time. 

How to Change a Circular Saw Blade Craftsman

But if done incorrectly, it can lead to dangerous results. In this blog post, we’ll teach you exactly how to change the blade of your Craftsman Circular Saw–with easy-to-follow instructions! With our guidance, you’ll be able to replace blades confidently in no time.

Tools You Will Need

  • Safety glasses
  • Work gloves
  • Wrench (for removing the arbor nut)
  • Flathead screwdriver or Hex key
  • New Circular Saw Blade

8 Instructions on How to Change a Circular Saw Blade Craftsman

1. Unplug the Saw

To ensure your safety while changing the blade on your Craftsman Circular Saw Blade, it is essential to unplug the saw from any power sources first. Even if you plan to use only hand tools, there is still the risk of accidental activation and injury. Before beginning work of any kind on the saw, double-check that it is powered off and disconnected. 

The same applies when installing a new blade, once the old blade has been detached from the motor shaft, make sure to double-check that no power is running through it before completing the installation of the new blade. By taking a few extra steps for safety, you can complete this task quickly and with peace of mind.

Installing a New Blade

2. Locate and Remove the Blade Guard

Changing the blade on a Craftsman circular saw can seem daunting, but it’s quite easy to do. Firstly, locate and remove the blade guard and arbor nut by using a wrench – be sure to slip on some protective gloves so that you don’t wound your hands in the process. The old saw blade will then come away easily, enabling you to employ the new one. 

Carefully place your new saw blade onto the arbor of your circular saw then turn it clockwise until it clicks into place. Replace and tighten the arbor nut before replacing the blade guard, and you’re ready to start cutting!

3. Loosen the Bolts

Changing a circular saw blade can be intimidating, but it doesn’t have to be. To make the process easier, all that you need are the right tools and a few minutes of your time. Depending on the type of saw that you have, you may need either a flathead screwdriver or a hex key to loosen and remove the bolts that hold the old saw blade in place. 

Once those bolts have been removed, carefully take out the old blade, making sure to keep your fingers away from any sharp edges. After replacing with a new blade and securely tightening down each bolt, your circular saw should be good as new and ready for action!

4. Carefully Remove the Old Saw Blade

Replacing a circular saw blade is a relatively easy job and should only take a few minutes. To start, make sure your saw is switched off and unplugged for safety. Carefully examine the arbor and inspect the blade for any damage or wear. Once you’re ready to remove the old saw blade, use a wrench that fits over the flats of the arbor and lock it in place. 

Holding the blade firmly so that it does not move, turn the wrench counter-clockwise until it releases from the saw. Make sure to then handle it safely and store it in an area away from children. Finally, discard it properly per your local regulations.

5. Place Your New Saw Blade

Changing a circular saw blade is a simple but important task. It is essential to ensure that the saw blade is properly installed and works properly to ensure safety, accuracy, and an excellent finish on all projects.

To begin, make sure your saw is unplugged and safely supported before beginning. Next, place your new saw blade onto the arbor, taking care to get the mounting holes to align correctly so it can sit securely when tightening it. 

If you need to adjust the height of your guard plate, then use the adjustment knob or an Allen wrench as appropriate. The next step is simply to tighten the arbor nut over the blade using a wrench or socket depending on your model. After that, you can put back all of your protective guards before powering up again – then test for proper operation before tackling any project!

Adjust the Height of Your Guard Plate

6. Securely Fasten the New Saw Blade

Properly replacing a saw blade in your Craftsman circular saw is important to guarantee maximum safety while working and impeccable performance of the tool. To secure the new blade, you will need either a flathead screwdriver or a hex key to tighten the bolts that hold it in place. 

Start by loosening the tension first using any one of those tools, followed by dislodging the old blade. Now, line up the new blade with the direction of the cut arrow, insert it into its position without touching any of its teeth and tighten it back up. Make sure all four bolts are tightened properly for an assured safe operation.

7. Place the Arbor Nut Back on

Changing a blade on a Craftsman circular saw is a fairly simple task with minimal effort needed from the user. After removing the arbor nut with a wrench, the new blade must be put in place. Then, the arbor nut should be replaced, taking caution not to cross-thread it as this could cause irreparable damage to the saw. 

Once the nut is back in place, using the same wrench tighten it securely ensuring that it is properly tightened—this will help ensure that your blade stays locked in securely while you saw cutting. Additionally, after tightening it’s still important to double-check that everything is secure and nothing needs adjustment before turning the saw on and starting to work.

8. Reinstall the Saw Blade Guard

Reinstalling the saw blade guard on a Craftsman circular saw is an important step to take once you have finished changing a saw blade. It keeps you safe by ensuring that blades, debris, and other items don’t fly out while the unit is in use. To reinstall the guard, simply align it with your saw’s holes and secure it tightly with the screws provided in your kit. 

If applicable, you should also plug your saw back into its power source after verifying that all components are properly secured. This will allow for proper operation of the unit when cutting materials. Remember to always be sure to follow all safety guidelines before beginning any project involving tools or machinery.

Now that you know how to change a circular saw blade Craftsman, you’re ready to tackle your bigger carpentry projects! Always remember to use safety glasses and gloves when working with tools, and to follow all instructions that came with the saw blade. With our guidance, you can now confidently change blades in no time. Happy building!

Tips on Changing a Circular Saw Blade Craftsman

  1. Unplug the saw. Before you do anything, make sure to unplug the saw. You don’t want to accidentally turn it on while you’re working on it.
  2. Remove the blade guard. The next step is to remove the blade guard. This is the piece of plastic that covers the blade and is there for your safety. Once the blade guard is off, you should be able to see the blade.
  3. Loosen the arbor nut. The arbor nut is what holds the blade in place. To remove the old blade, you’ll need to loosen this nut. You can do this with a wrench or socket set.
  4. Remove the old blade. Once the arbor nut is loosened, you can remove the old blade by pulling it off of the arbor shaft.
  5. Clean off the arbor shaft. Before you install the new blade, take a moment to clean off the arbor shaft. This will help ensure that the new blade is installed properly and doesn’t become loose over time.
  6. Install the new blade. To install the new blade, simply slide it onto the arbor shaft and tighten the arbor nut until it’s snug. Make sure that the teeth of the blade are pointing in the correct direction before you tighten the nut all the way.
  7. Reinstall the blade guard. Once you’ve installed the new blade, you can put the blade guard back in place. Make sure that it’s properly positioned so that it will offer adequate protection while you’re using the saw.
  8. Plug in the saw and test it out. Now that everything is back in place, you can plug in your saw and give it a try. If everything is working properly, you should be good to go!
You Can Plug in Your Saw

How to Safely Replace the Blades on Your Craftsman Circular Saw

Replacing your circular saw blades can be a necessary but daunting task. To ensure the safe operation of your Craftsman circular saw, it is imperative to follow the proper procedure and use the appropriate tools. Begin by unplugging and grounding your saw – an essential step to protecting yourself from hazardous electricity in the event the power turns on unexpectedly. 

Once complete, carefully move the blade cover away from the blade itself; this should expose two screws that hold the blade in place. Gently loosen them and slowly remove the blade from your saw. Using a ruler or measuring device, double-check that your new replacement blade is an exact match for your particular saw and rail guide system, before firmly gripping both sides of it to attach it securely. 

Finally, tighten all screws with a torque wrench and check that they are condensed closely around the blade perimeter so everything is properly aligned. With these steps followed, you can now begin work with your Craftsman circular saw confident that you have completed a safe and successful replacement procedure.

How To Easily Change The Blades In Your Craftsman Power Tools

If you’re looking to get the most out of your Craftsman power tools, routine blade replacement is key. Changing out worn blades for sharp ones can be difficult if you don’t know what you’re doing, but with a few simple steps, the process is fairly easy. First, begin by unplugging your tool and ensuring it’s off – safety first! 

Then remove the retaining bolt that holds the old blade in place. Next, slide on your new blade and ensure it is properly seated in the groove on the arbor. Finally, tighten down the retaining bolt and plug in your tool to give it a try. Changing blades doesn’t have to be hard – following this guide will have your power tools running better than ever in no time!

Remove the Retaining Bolt


You now know how to change a saw blade on a Craftsman circular saw. You should carefully determine how to change a circular saw blade craftsman. If you found this article helpful, please share it with your friends or family who may need assistance changing their own saw blades. Stay safe when working with power tools and always follow the manufacturer’s instructions.

Leave a Comment