Breaking a car window with a screwdriver may be your only option if you find yourself locked out of your vehicle and in need of quick access without the use of keys. It sounds like a task only possible in Hollywood movies, but making sure you have the
right tools and using some force can actually make this process much simpler than it seems at first glance – even for those who are not particularly mechanically inclined! In this blog post, we will discuss step-by-step how to break a car window with a screwdriver. Read on to learn more about how easy it is to become an expert locksmith in such cases of emergency!
Will a Screwdriver Break a Car Window?
The short answer is yes, a screwdriver can be used to break a car window. However, it takes quite a bit of force, and you have to use the right type of tool. The best type of screwdriver for this job is one with an impact-resistant head that won’t chip or wear down easily when struck against the glass. It’s also best to use a large screwdriver with a long handle for leverage and for more impact when hitting the window.
To break the car window, you will need to hit the window multiple times in the same spot with all your strength. Start by tapping lightly to create a small indentation, then increase strike intensity until the glass breaks. Be sure to wear safety goggles and gloves while doing this, as broken glass could fly at you upon impact. When striking, make sure that you keep your body away from the glass, so you don’t accidentally cut yourself on any jagged edges.
If done correctly, breaking a car window is not too difficult; however, it should be attempted only in cases of emergency. It’s best to contact a professional if you need to break into your car, as a screwdriver can cause considerable damage to the window and the surrounding areas.
Ultimately, it is possible to break a car window using a screwdriver in an emergency situation. However, it should be done only with caution, as glass shards and other sharp objects could be potentially dangerous.
Also, remember that the best type of screwdriver for this job is one with an impact-resistant head that won’t chip or wear down easily when struck against the glass. With these tips in mind, breaking a car window using a screwdriver can become less of an ordeal if needed in an emergency situation.
10 Methods How to Break a Car Window with a Screwdriver
Breaking a car window can be useful if you find yourself in an emergency situation with no other means of escape. In order to do this safely and effectively, you will need to have the right type of tool on hand. A screwdriver is one of the more efficient tools to use when breaking a car window because it can provide the necessary leverage and force required to crack through the glass. Here are ten ways that you can use a screwdriver to break a car window:
1. The Wedge Method:
Start by wedging the flat end of the screwdriver between two pieces of rubber surrounding the edge of the car window.
Make sure that you wedge it in as far as possible for maximum leverage. Then, bang on the handle of the screwdriver with a heavy object like a hammer or rock until it creates an opening large enough for you to fit your hand through and unlock the door from the inside.
If you don’t have anything to bang on the handle with, you can also try stepping on the screwdriver while pushing down and inward.
2. The Tap Method:
Place the tip of your screwdriver against any part of the car window and gently tap on it with a hammer multiple times until cracks start appearing in the glass; then, use your hand or foot to kick out any remaining shards and make an opening large enough for you to fit through.
It’s important to make sure you wear shoes and protective clothing when you do this, as glass shards can be dangerous. This method is ideal for quickly and effectively breaking a car window in an emergency situation. It’s also one of the less damaging methods, as it doesn’t require you to insert the screwdriver into the window.
3. The Hammer Strike Method:
This method involves using more force than with either of the previously mentioned methods but is still relatively safe compared to bashing against the glass with something heavier like a rock or brick. Hold onto your screwdriver firmly and aim its tip at any part of the glass window before swinging it down rapidly with a hammer right behind it in order for it penetrates through easier.
While the glass may not shatter, it should crack and be easier to break through with additional strikes. Be aware that this method can create a lot of noise and should be used only in case of an emergency.
4. The Leverage Method:
This technique is more difficult than either of its counterparts mentioned above; however, if done correctly, it may be able to break even heavily reinforced windows due to its increased leverage capabilities provided by a long-handled screwdriver or crowbar placed inside two separate holes drilled into different parts of the window frame or locking mechanism near where you want to access from (make sure not to drill too far or else there may be permanent damage).
With this method, twist both handles in opposite directions until they reach their fullest potential before giving them one last push towards each other in order for them to create enough pressure that cracks open even thick glass windows. Be sure to wear protective gear when using this method, as shards of glass may fly in multiple directions.
5. The Wedge-and-Hammer Method:
If neither of these methods has worked so far, try combining them by wedging your flathead screwdriver between two rubber surfaces surrounding your desired point-of-entry while holding onto its handle firmly with one hand while using another heavy object such as a hammer or rock to hit its backside repeatedly until an opening is created large enough for entry (be extra careful when doing this so that no unnecessary chips occur).
The rubber will help protect the glass from cracking, while the hammer or rock provides extra force to drive the screwdriver in further. This method, however, can also be dangerous if done incorrectly and not advised unless you are experienced in breaking car windows.
6. The Pressure Point Method:
For cars with curved windshields, locate any spot near where you want to access from that has less resistance than other places on their surface, such as near metal reinforcements around edges where there may be small gaps between panels allowing your pointy tool easier access into glass’s surface (take extreme caution when attempting this so that minimal damage occurs).
Once located, place your chosen instrument directly over said weak spot while pressing hard on both ends simultaneously until an open passage appears large enough for entry (this technique may require additional tools such as mallets or chisels depending upon level difficulty).
7. The Knock-Out Method:
Also known as “bumping,”; this technique involves creating tiny cracks along an entire perimeter around your desired point of entry before leveraging those fractures together with something more powerful like a brick or concrete block, which will eventually cause an entire piece(s) break off leaving behind an opening large enough for entry (WARNING – only use this method if all others have failed as it requires much greater force which could cause serious injury).
8. The Double Whack Method:
This method involves whacking two points on opposite sides along any given edge multiple times in rapid succession until the whole section shatters away (WARNING – don’t hit too hard! Too much force could result in permanent damages causing costly repairs!)
9. The Kicking Out Procedure:
It’s time-consuming but highly effective, using some sort of blunt objects, such as a shoe heel press repeatedly along the perimeter around desired entry point while gradually increasing the amount of applied pressure each time the lasting hit lands on the window.
This is a very effective way of breaking car windows. However, it may take some time and effort to complete the job. For best results, be sure to wear protective equipment such as gloves and safety glasses.
10. The Sledgehammer Technique:
As a last resort option, if all else fails, try using a sledgehammer to smash directly onto the weakest part car’s window repeatedly until the entire chunk breaks away, providing a clear passageway into the area being targeted(THIS IS NOT ADVISED AS IT CAN CAUSE MORE DAMAGE THAN NEEDED).
To do this, hold the sledgehammer in two hands and aim for the corner of the window. This will provide direct force to that point with maximum destruction.
Conclusion
Use a screwdriver to break a car window in an emergency situation. First, find the right spot on the glass by looking for symbols that indicate where to hit. Once you’ve found the spot, hold the screwdriver like a hammer and hit the handle end against the glass as hard as you can. The glass should break easily. If it doesn’t, try hitting it again or finding another spot. Be sure to use caution when breaking the window, so you don’t hurt yourself or anyone else. Thanks for reading, and we hope this has given you some inspiration on how to break a car window with a screwdriver!
