If you’re not familiar with micro links, they’re the small gold or silver links that are used to connect two pieces of jewelry. They’re tiny and can be a bit challenging to take out if you don’t have the right tools. In this blog post, we’ll show you how to take out microlinks without pliers using a few simple tools you probably have lying around your house.
Microlinks, or hair extensions, have become a popular way to add length and volume to one’s hair. While they can be a great option for many, they can also be difficult to remove if they are not installed properly. Stay tuned!
What is a Microlink?
A microlink is a small metal ring that is used to connect hair extensions to your natural hair. They come in different sizes and colors, but most commonly they are gold or silver. Micro links are popular because they offer a more discreet and natural look compared to other types of hair extension installation methods. You can add just a few microlinks for volume, or many to achieve longer and fuller hair.
Why Do You Need Pliers for Removing Microlinks?
Pliers are typically used to remove microlinks because they provide a strong grip and allow for precise manipulation. They also have a small tip that is perfect for grabbing the tiny links. However, not everyone has pliers readily available, and using them can sometimes result in damaging the links or your natural hair.
It’s possible to remove microlinks without pliers if you have the right tools and follow these simple steps.
How Long Do Microlinks Last Without Maintenance?
MicroLink usually lasts between 6-12 months without maintenance. However, some clients may require more frequent maintenance or touch-ups to keep their MicroLink looking fresh and healthy. The longevity of a person’s MicroLink depends on many factors, including the quality of the hair used in the installation, how well they take care of their hair, lifestyle habits (like swimming or sleeping with a cap), and individual hair characteristics like thickness and curl pattern.
To extend the life of your micro links, it is recommended that you come in for regular maintenance appointments every 8-10 weeks and follow proper aftercare instructions. Additionally, using sulfate-free shampoos and deep conditioning treatments and avoiding heat styling when possible can help maintain your MicroLink for as long as possible. With proper care, MicroLink can last up to a year or longer!
10 Methods How to Take Out Microlinks without Pliers
1. Use a Paperclip
One of the easiest ways to remove a microlink without pliers is to use a paperclip. Simply straighten out the paperclip and insert it into the small opening at the top of the link. Once the paperclip is inserted, twist it back and forth until the link comes undone. If you find that the paperclip isn’t strong enough, try using a thicker wire.
You can also use this method with a bobby pin or safety pin if you don’t have a paper clip on hand. It may take a bit more effort, but it can still be an effective way to remove microlinks without pliers. The key is to find a small, thin object that can fit into the opening of the link.
2. Use a Bobby Pin
Another easy way to remove a microlink without pliers is to use a bobby pin. Straighten out the bobby pin and insert it into the small opening at the top of the link. Once the bobby pin is inserted, twist it back and forth until the link comes undone. Although this method may be slightly more difficult than using a paperclip, it can still be successful if done properly.
It’s important to note that the bobby pin should be inserted at an angle to firmly grip the link and twist it in the opposite direction to open it. This method may take a bit of practice, but once you get the hang of it, it can be an effective way to remove microlinks without pliers.
3. Use a Safety Pin
If you don’t have a paperclip or bobby pin on hand, you can also use a safety pin to remove a MicroLink. Simply straighten out the safety pin and insert it into the small opening at the top of the link. Once the safety pin is inserted, twist it back and forth until the link comes undone. Make sure to grip the safety pin firmly to ensure that it doesn’t slip out of your hand.
Otherwise, the safety pin method follows a process similar to that of using the bobby pin or paperclip. It may take a bit more effort and patience, but it can still be an effective way to remove microlinks without pliers.
4. Use a Needle
If you have a needle, you can use it to remove a microlink without pliers. Simply insert the needle into the small opening at the top of the link and twist it back and forth until the link comes undone. If you find that the needle isn’t strong enough, try using a thicker wire. If you don’t have a needle, you can also use a straightened-out paper clip. Make sure to grip the needle firmly to ensure that it doesn’t slip out of your hand.
But keep in mind that this method can be more challenging and requires a steady hand, so it’s not recommended for those who are new to removing microlinks without pliers.
5. Use Tweezers
Tweezers can also be used to remove a microlink without pliers. Simply insert the tips of the tweezers into the small opening at the top of the link and squeeze them together until the link comes undone. If you find that the tweezers aren’t strong enough, try using a thicker wire. Make sure to grip the tweezers firmly to ensure that they don’t slip out of your hand. Although this method may be slightly more difficult than using a needle or paperclip, it can still be successful if done properly.
It’s important to note that the tweezers should be inserted at an angle to firmly grip the link and squeeze it in the opposite direction to open it.
6. Use Your Fingernails
If you don’t have any tools on hand, you can try using your fingernails to remove a microlink. Insert your fingernails into the small opening at the top of the link and pull them apart until the link comes undone. While this method may be slightly more difficult than using a needle or tweezers, it can still be successful if done properly. Make sure to grip the link firmly to ensure that it doesn’t slip out of your hand.
But keep in mind that this method can be more challenging and requires a steady hand, so it’s not recommended for those who are new to removing microlinks without pliers.
7. Use a Screwdriver
If you have a screwdriver, you can use it to remove a microlink without pliers. Simply insert the tip of the screwdriver into the small opening at the top of the link and twist it back and forth until the link comes undone. If you find that the screwdriver isn’t strong enough, try using a thicker wire. Make sure to grip the screwdriver firmly to ensure that it doesn’t slip out of your hand.
Otherwise, the screwdriver method follows a similar process as using tweezers or needles. It may take a bit more effort and patience, but it can still be an effective way to remove microlinks without pliers.
8. Use an Exacto Knife
An exacto knife can also be used to remove a microlink without pliers. Simply insert one of the blades into the small opening at the top of the link and pry it open until the link comes undone. While this method may be slightly more difficult than using a needle or tweezers, it can still be successful if done properly. Make sure to grip the exacto knife firmly to ensure that it doesn’t slip out of your hand.
But keep in mind that this method can be more challenging and requires a steady hand, so it’s not recommended for those who are new to removing microlinks without pliers.
9. Use an Ice Cube
This method may sound strange, but it can actually work! Take an ice cube, rub it over the top of your microlink, and wait a few minutes. The cold temperature may cause the link to shrink and come undone. Make sure to grip the link firmly to ensure that it doesn’t slip out of your hand. Although this method may be slightly more difficult than using a needle or tweezers, it can still be successful if done properly.
It’s important to note that this method may not work for everyone and may take a few tries before the link comes undone. But it’s worth a try if you don’t have any tools on hand.
10. Use Soap and Water
Soap and water can also be used to remove a microlink without pliers. Take some warm, soapy water, dip your microlink into it, and allow it to sit for a few minutes. This should loosen the link enough that you can pull it apart with your fingers. Although this method may be slightly more difficult than using a needle or tweezers, it can still be successful if done properly. Make sure to grip the link firmly to ensure that it doesn’t slip out of your hand.
These are just a few methods for removing a microlink without pliers. With a bit of patience and some practice, you should be able to find the method that works best for you. Hopefully, one of the above methods will help you take out your micro links without pliers! Good luck!
With any of these methods, be careful not to damage your microlink while trying to get it off. If you are having difficulty removing the link with any of these methods, it may be best to seek professional guidance.
Microlinks can be delicate and easily damaged, so extra caution should be taken when trying to remove them. Depending on the type of link that you have, it may also require special tools or techniques that only a professional hairstylist can provide. Be sure to consult an experienced stylist before attempting any of these methods.
Do You Need to Use Professionals?
While these methods may be effective in removing microlinks without pliers, it is important to note that professional help is always available. As mentioned before, micro links can be delicate and easily damaged, so seeking the help of a professional hairstylist may be the safest and most effective option. Plus, they have the necessary tools and experience to handle micro link removal without causing any damage to your hair or scalp.
In addition, if you are planning on reusing your microlinks for another hairstyle, it is important to properly remove them in order to ensure their longevity. A professional hairstylist can also provide tips and advice on how to properly care for your microlinks.
So, while it is possible to remove microlinks without pliers, it may be best to seek professional help in order to avoid any potential damage or complications. Keep in mind that taking proper care of your hair extensions will not only save you money in the long run but also keep your hair healthy and looking great. We hope this guide has been helpful in teaching you how to remove microlinks without pliers!
Things to Consider while Taking Out Microlinks without Pliers:
- Take a few test strands to make sure it’s safe for the extension. When using pliers, you want to be extra careful so that you don’t damage the extensions.
- Be gentle and use slow movements when taking out microlinks. As with other methods of removing hair extensions, it is important to take your time in order to avoid breaking or pulling out too much hair at once.
- Make sure that all links are removed before taking out any microlinks. This will help ensure that none of the extensions are left behind in the hair.
- Have someone else around who can help if needed while taking out the extensions, as they will be able to catch any pieces that may have been missed during removal.
- After taking out the microlinks, use a wide-tooth comb to gently detangle any remaining strands of hair. This will help ensure that all of the extensions are removed without causing any damage.
- Finally, make sure to condition and moisturize the hair once all of the extensions have been taken out in order to restore any lost moisture and improve the manageability of the natural hair.
With these tips in mind, you should be able to successfully take out your microlinks without using pliers! Taking your time and being gentle is key when removing extensions in this way so that you don’t end up with broken or damaged strands.
You Can Check It Out Get Nozzle Off Pressure Washer Sun Joe
Frequently Asked Questions:
Q: Can I Use Regular Pliers to Remove Microlinks?
A: It’s not recommended to use regular pliers as they may not have a grip that is small enough for the tiny microlinks and could end up damaging them. It’s best to use specialized tools or try one of the alternative methods listed above.
Q: Can I Take Out Microlinks Myself or Should I Go to a Professional?
A: It is possible to take out microlinks yourself, but it may be best to consult a professional hairstylist if you are unsure or have never done it before. They will have the necessary tools and experience to safely remove the extensions without causing damage to your hair.
Q: Are There Any Special Techniques for Taking Out Microlinks?
A: Depending on the type of microlink used, there may be different techniques or tools recommended by professionals. It is best to consult with a hairstylist who specializes in extensions to determine the best method for your specific type of microlink. So, it’s important to do proper research and follow the manufacturer’s instructions for safe removal.
Q: How Often Should I Take Out My Microlinks?
A: It is recommended to remove microlinks every 4-6 weeks in order to prevent damage or tangling of the natural hair. Leaving them in for too long can also make it more difficult to remove them without causing damage, so it’s important to follow a regular maintenance schedule.
Conclusion:
Microlinks are a popular way to extend the length of your hair without having to use traditional methods such as extensions or weaves. If you’re looking for a more permanent solution, then microlinks may be the answer for you.
They can last up to six weeks and are relatively easy to remove at home with a few simple supplies. With this guide, you’ll be able to take out your microlinks quickly and painlessly.
Thanks for reading our blog post on how to take out microlinks without pliers! We hope you found it helpful and informative.
You Can Check It Out To How to Read Oil Tank Gauge
Occupation: Expert in Hardware Tools
Education: Bachelor’s Degree in Mechanical Engineering
Profile:
Enrique Howard is a seasoned expert in the field of hardware tools, with a robust background in mechanical engineering that underpins his extensive knowledge and skills. Holding a degree in mechanical engineering, Enrique has cultivated a deep understanding of tool design, mechanics, and the intricacies of various hardware applications. His educational foundation empowers him to innovate and refine tools that enhance efficiency and effectiveness in a wide range of industries.
Professional Focus:
Enrique’s professional focus encompasses a diverse array of areas within the hardware tools sector, including:
- Tool Design and Development: Leveraging his engineering expertise, Enrique specializes in designing tools that meet specific user needs, ensuring optimal performance and durability.
- Material Science: Understanding the properties of various materials allows him to recommend the best tools for specific applications, enhancing safety and efficiency.
- Ergonomics: He emphasizes the importance of ergonomic design in tools, striving to create solutions that reduce user fatigue and improve comfort during prolonged use.
- Sustainability: Enrique is committed to promoting environmentally friendly practices in tool manufacturing, advocating for the use of sustainable materials and processes.
- Education and Training: Through workshops, seminars, and written content, he focuses on educating both professionals and DIY enthusiasts about tool selection, maintenance, and safe usage practices.
Throughout his career, Enrique has worked on numerous projects, collaborating with manufacturers and craftsmen to develop cutting-edge hardware solutions. His expertise spans from traditional hand tools to advanced power tools, allowing him to contribute significantly to both professional and DIY communities.
As an author, Enrique shares his insights through articles, guides, and tutorials, aimed at helping enthusiasts and professionals alike navigate the complexities of hardware tools. His passion for education and practical application drives him to continually explore new technologies and methodologies, making him a trusted voice in the hardware industry.
Whether he’s writing about the latest tool advancements or providing practical tips for tool maintenance, Enrique Howard is dedicated to empowering others with the knowledge and skills necessary to excel in their hardware endeavors.