According to Delta, it is important to know how to remove a shower handle without a set screw. There are two types of handles, clear and opaque. Clear handles have an Allen screw that secures the handle to the shower, whereas opaque handles have a set screw that is hidden from view. To remove a clear handle, you will need an Allen wrench.
To remove an opaque handle, you will need a flathead screwdriver. First, locate the set screw and insert the appropriate tool. Next, rotate the tool counterclockwise until the handle is loose. Finally, pull the handle off of the shower. If you have any difficulty removing the handle, delta recommends contacting a professional plumber. In this blog post, You will learn in detail how to remove delta shower handle with no set screw.
Step by Step Processes for How to Remove Delta Shower Handle With No Set Screw
Step 1: Locate the Metal Cover
Start by locating the metal cover that is located on the inside of your Delta shower handle. This cover will be found directly behind, where you need to place a screwdriver to remove it. Gently insert a flathead or Phillips head screwdriver into the hole on the metal cover’s bottom side.
Step 2: Remove the Metal Cover
Once you have located and inserted your screwdriver into the metal cover, use it to pry out the cover. The metal cover should come off easily, although if it doesn’t, wiggle it around slightly until it comes loose. Once the metal cover is removed, you will find a button-shaped piece of plastic connected to the handle.
Step 3: Push the Plastic Piece Down
Gently push down on the plastic piece, and it will come off. The handle should now be free from its grip, and you can pull it straight out. Be sure to inspect the area where the handle was removed for any debris or dirt that may be present and remove it. This will ensure the handle can go back on without any problems.
Step 4: Check for a Set Screw
Before you can re-install the Delta shower handle, check for a set screw that may be located underneath the metal cover. If there is no set screw, skip to replacing the metal cover you removed at step one by feeding the plastic piece through and pushing it back into its original position. Re-tighten the set screw (if there is one) to secure it in place.
Step 5: Test the Handle
Once you have securely replaced the metal cover, check that your handle is functional by attempting to turn it on and off several times. When removing and reinstalling Delta shower handles, it is important to take the necessary precautions. Make sure to use the right type of tool for each job and keep your hands away from any sharp edges that may be present. Additionally, never force or over-tighten the set screw.
Step 6: Seal the Handle
Finally, after you have tested that your handle is operational and all pieces are properly secured in place, it’s a good idea to apply a sealant around the edges of your Delta shower handle. This will help to prevent any water or moisture from entering the handle and causing damage in the future.
How Should You Lubricate the Internal Components After Removal?
Once you’ve removed the Delta shower handle with no set screw, it’s important to lubricate all of the internal components properly. To do this, ensure no water is in the pipe or other areas near your handles. Then, use a high-quality lubricant on all the threads and moving parts inside your handle. This helps to prevent corrosion of the inner components and makes them easier to handle.
Once complete, reassemble all of the parts in reverse order. Make sure that you tighten everything securely before completing the job. Finally, turn on the water and check for any leaks or other issues. Enjoy your newly installed Delta shower handle with no set screw if everything is working properly!
How Can You Fix Any Problems if the Handle Does Not Work Properly After Installation?
If the handle does not work properly after installation, there are a few steps you can take to try and fix the problem. Firstly, check to ensure that the Delta handle was installed correctly and securely. If it was not installed properly, then re-install it following the manufacturer’s instructions carefully.
Secondly, check to see if there is any debris or dirt that could be causing the problem. If so, use a soft cloth to remove the dirt and debris and try the handle again. Thirdly, check to ensure that all valve components are working properly. If something is not functioning correctly, you may have to replace it with a new one.
Finally, if none of the above steps solve the problem, contact Delta’s customer service team for assistance in troubleshooting and fixing the issue. They may be able to help you figure out what is causing the handle to malfunction and provide advice on how to fix it. By following these steps, you should be able to troubleshoot any potential problems with your Delta shower handle and ensure it works properly.
Tips for How to Remove Delta Shower Handle With No Set Screw
- Before starting, turn off the shower’s water supply and disconnect any hoses from the fixtures.
- Take a pair of needle nose pliers or a small adjustable wrench and firmly grip the handle with one hand while you use the other hand to twist counterclockwise gently.
- If the handle doesn’t come off easily, you may need to use a pair of vice grips or adjustable pliers to increase your grip on the handle and apply more force when twisting counterclockwise.
- After removing the handle, inspect it to see if there is a set screw on the underside. If so, use a flathead screwdriver to loosen and remove it before continuing with your repair/replacement project.
How Often Should You Check on the Handle for Proper Functioning and Maintenance?
If you have a Delta shower handle with no set screw, it should be checked on at least once every six months. This will help ensure that it is functioning properly and that any maintenance needed is done in a timely fashion. It’s important to attend to this regular inspection as the handle can become loose or damaged over time if not maintained correctly.
During the inspection, check for signs of wear and tear or damage. Ensure that the handle is firmly attached to the shower wall and that all washers are in place and functioning properly. If you find any issues, it’s best to replace them immediately, as they could cause leaks or other issues if left unchecked.
Also, check the shower handle to make sure it moves freely and is not stuck or rusted. If any rust is present, you may need to sand it down with steel wool or use an appropriate cleaning solution to remove it. Additionally, inspect the handle’s nooks and crannies to ensure that no debris that could interfere with the handle’s functionality has been collected.
If any repairs or replacements are necessary, it’s important to make sure that you follow the manufacturer’s instructions for removing and replacing the Delta shower handle with no set screw.
You Can Check It Out Open Kobalt Ratcheting Wrench Set
Why Should You Hire a Professional to Remove Delta Shower Handle With No Set Screw?
When you have a Delta shower handle with no set screw, it can be difficult to remove without the help of a professional. It is a complex process that requires specialized tools and knowledge, but it is also possible to damage the shower handle if done incorrectly.
To avoid any potential damages or complications, hiring an experienced handyman or plumber is the best way to ensure that your Delta shower handle is properly and safely removed. A professional can quickly assess the situation and determine the most effective method for removing the handle without causing any damage.
In addition to being knowledgeable about removing a Delta shower handle with no set screw, a professional will have access to specialized tools that make the removal process easier and faster. This ensures the job gets done quickly and correctly, saving you time and potentially expensive repairs or replacements down the line.
How Much Will It Cost if You Hire a Professional?
You may need to hire a professional if you cannot remove your Delta shower handle without a set screw. How much will this cost? It depends on the type of work that needs to be done and the complexity of your plumbing system. For example, if there is an issue with the internal part of the handle, like a worn-out cartridge, a plumber may need to come in and repair or replace the piece.
This can cost anywhere from around $100 to over $500, depending on the work involved. If you’re dealing with a stubborn handle that won’t budge, a professional may be able to remove it without damaging your plumbing fixtures by using specialized tools and techniques.
Depending on the job, this can cost anywhere from $50 to $200. Whatever the case may be, hiring a professional is typically more expensive than doing it yourself.
You Can Check It Out Organize Ratchet Extensions
Conclusion
Removing a Delta shower handle with no set screw can be done by using a flathead or Phillip’s head screwdriver to pry the handle off. If you experience any difficulty in this process, you may need to lubricate the area around the handle and use a pair of pliers to remove it carefully.
It’s important to use caution in this process, so make sure to take your time and be gentle. After you remove the handle, you can go ahead and replace it with a new one or, if needed, call a plumber for assistance. I hope this article has been beneficial for learning how to remove delta shower handle with no set screw. Make Sure the precautionary measures are followed chronologically.
