Mounting a power strip to a wall without screws can be a practical and convenient solution, especially in situations where drilling is not possible or preferred. Whether you’re looking to avoid damaging the wall surface or seeking a temporary setup, several alternative methods allow you to securely attach a power strip to the wall.
In this article, we will explore various techniques and tips on how to mount power strip to wall without screws. From using adhesive strips and hooks to employing mounting brackets and cable clips, we’ll guide you through each method, ensuring your power strip is safely and securely affixed to the wall, providing easy access to multiple outlets without the need for permanent drilling or hardware.
The Importance of Safely Mounting Power Strips
When dealing with electricity, safety should always be a priority. Properly mounting power strips to the wall ensures that they stay securely in place and won’t pose any risk of falling off and creating an electrical hazard. It also reduces the risk of overloads due to loose connections.
Additionally, if you have small children or pets at home, safely mounting your power strip can keep them from accidentally pulling on it and exposing themselves to its cables and outlets.
For all these reasons, it is essential that you mount your power strips correctly and securely using either screws or adhesive tape — but what do you do when neither of these methods are available? The good news is that there are several ways to mount a power strip without having to use screws.
Here are some of the most effective and safest methods for mounting a power strip without having to use screws:
- Mounting with Adhesive Hooks or Command Strips
- Double-sided Foam Tape
- Nail-in Wall Anchors
- Zip Ties
- Loop & Lock Cable Ties
- Velcro Cable Organizers
- Magnet Mounts
- Portable Power Strips
- Customizing Outlets with Slots and Holes
- Installing Self-Adhesive Outlet Plates
By following one of these methods, you can easily mount your power strip securely and safely to the wall without the need for screws. This not only ensures your power strip remains firmly in place and avoids potential accidents, it also looks tidier and neater than if you had just left the power strip sitting on a table or countertop.
Alternative Methods for Screw-Free Installation
In addition to double-sided mounting tapes, there are other non-screw methods for installing a power strip on the wall. These include:
1. Hook and Loop Fastener Strips
These are an adhesive backed strips of hook and loop fasteners. The hook side is mounted to the wall, with the loop side attached to the power strip. This is a simple installation that can be done in minutes and requires no additional tools or screws.
2. Cable Clips
These are plastic clips designed to attach cables or wires securely against walls without damaging them or leaving permanent marks. They have a sticky backing that attaches easily to your wall, while the cable itself is held firmly in place with two small clips.
3. Magnets
You can use magnets to attach the power strip directly to a metal surface, such as a filing cabinet or other metal furniture. This is an especially good solution for renters who may not want to damage their walls with screws or adhesive strips.
10 Methods How to Mount Power Strip to Wall without Screws
Method 1: Adhesive Strips
Adhesive strips, also known as mounting tape, offer a quick and non-intrusive way to mount a power strip to the wall. These strips feature strong adhesives on both sides, providing a reliable bond between the power strip and the wall. Start by cleaning the surface of the wall and the back of the power strip to ensure proper adhesion. Peel off the backing from the adhesive strips and press them firmly onto the back of the power strip.
Method 2: Command Hooks
Command hooks, renowned for their damage-free hanging capabilities, provide an effective method to mount a power strip without screws.
These hooks come with specially formulated adhesive strips that offer secure hold and easy removal when needed. To utilize command hooks, choose hooks that can handle the weight of your power strip and its connected devices.
Clean the wall surface, following the manufacturer’s instructions for application. Then, attach the command hooks to the wall, allowing the adhesive to bond properly before hanging the power strip securely on the hooks.
Method 3: Velcro Strips
Velcro strips present a flexible and reusable solution for mounting a power strip without screws. This method allows you to easily remove and reposition the power strip whenever necessary. To use Velcro strips, attach one side of the Velcro to the back of the power strip and the other side to the desired spot on the wall.
The Velcro strips securely hold the power strip in place while allowing you to adjust its position as needed. Velcro strips are especially ideal for temporary setups or situations where you may need to move the power strip frequently.
Method 4: Double-Sided Foam Tape
Double-sided foam tape is a versatile and reliable adhesive option for mounting a power strip. The foam tape provides a cushioned layer between the power strip and the wall, helping to absorb vibrations and prevent damage to both surfaces.
When using foam tape, it’s crucial to choose high-quality tape with a weight capacity that exceeds the power strip’s weight, including the weight of its connected devices. Clean the surfaces thoroughly before applying the foam tape to ensure proper adhesion and a secure bond.
Method 5: Mounting Brackets
If your power strip comes with mounting brackets or keyholes on the back, you can use adhesive strips or strong adhesive putty to attach the brackets to the wall without drilling. This method allows you to position the power strip precisely where you want it.
Clean the wall and the back of the mounting brackets before applying the adhesive strips or putty. Attach the brackets to the wall and press them firmly to ensure a secure bond. Once the brackets are in place, hook the power strip onto the mounted brackets for a stable and reliable setup.
Method 6: Cable Clips or Ties
Cable clips or ties can be ingeniously repurposed to mount a power strip securely to the wall while also organizing the connected cables neatly. Start by attaching the clips or ties to the back of the power strip. Then, fix them to the wall, guiding the power cord downward to maintain a tidy appearance. This method not only ensures a secure mounting but also prevents cable clutter, providing a visually appealing and organized solution.
Method 7: Magnetic Strips
For power strips with a metal casing or backplate, magnetic strips can be a remarkably effective and convenient way to mount them without screws. Magnetic strips come with strong adhesive backing on one side, allowing you to attach them to the back of the power strip.
Then, simply find a suitable metal surface on the wall and position the power strip, allowing the magnetic strips to snap into place. This method is especially handy for metal surfaces such as steel cabinets or appliances.
Method 8: Self-Adhesive Hooks
Self-adhesive hooks offer an effortless and reliable solution for mounting a power strip to the wall without screws. Choose hooks with a weight capacity that exceeds the power strip’s weight, accounting for the weight of its connected devices. Clean the wall surface and apply the hooks following the manufacturer’s instructions. Hang the power strip securely on the hooks, ensuring it sits flush against the wall for a stable setup.
Method 9: Clamp Mounts
Some power strips come with clamp mounts that allow you to attach them securely to the edge of a desk or other furniture. To use clamp mounts, apply adhesive strips or strong adhesive putty to adhere the clamps to the wall.
Slide the power strip into the clamps and secure it tightly in place. This method not only provides a stable and accessible mounting but also allows for a clutter-free setup with cables held neatly in place.
Method 10: Desk Organizer with Cable Management
If you prefer a more comprehensive solution, utilize a desk organizer with built-in cable management features to mount the power strip securely against the wall. Place the power strip inside the organizer and use the cable management features to guide and secure the power cord. This method not only mounts the power strip but also enhances organization and aesthetics, keeping your workspace tidy and functional.
Conclusion
In conclusion, mounting a power strip without screws is an easy task for any homeowner. It requires minimal effort and no tools apart from just the strip itself. With these simple steps, you’ll be able to mount your power strips safely and conveniently.
After reading through this blog post, you now understand fully how to mount power strip to wall without screws utilizing mounting tape, cable clips, or zip ties methods you can easily select one of these techniques in no time.
All you need is determination and strength to adhere the chosen material firmly on walls without drilling or making holes in them. And voila! Your power strip is mounted securely with no mess. So what are you waiting for? Mount your power strips today by using one of these three quick solutions explained above and bid goodbye to all wiring problems!
