How to Fix Candle Sinkholes without Heat Gun

There is nothing more frustrating than lighting a candle, enjoying its fragrant glow for only a few minutes, and then having to deal with the unsightly wax mess it leaves behind. One of the most common causes of this mess is when the wax pools around the wick and creates a deep hole or sinkhole. 

How to Fix Candle Sinkholes without Heat Gun

While you can use a heat gun to fix this problem, there are other methods that work just as well and don’t require any special equipment. In this article, we’ll show you how to fix candle sinkholes without heat gun. Read on to find out which one is best for you!

How Do You Poke Relief Holes in Candles?

The first step in fixing candle sinkholes without a heat gun is to poke relief holes in the wax around the wick. This will allow air to flow freely and will reduce the suction effect that causes the sinkhole. You can do this with a toothpick or skewer, pushing it gently into the wax at different angles until you see small indentations at each point.

10 Methods How to Fix Candle Sinkholes without Heat Gun

1. Use a Hair Dryer 

If you don’t have a heat gun, you can use a hair dryer to fix your candle sinkholes. Simply hold the hair dryer about six inches away from the surface of the candle and move it around until the wax is melted and smooth. If you want to be extra careful, you can use a spoon or spatula to spread the melted wax around. While this method may not be as fast or effective as using a heat gun, it can still get the job done.

2. Use a Can of Compressed Air 

Another quick and easy way to fix candle sinkholes is to use a can of compressed air. Simply hold the can about six inches away from the surface of the candle and spray until the wax is melted and smooth. Make sure to use short bursts of air and move the can around to ensure that all the wax is melted. While this method may not be as quick or effective as using a heat gun, it can still get the job done.

3. Use a Lighter 

If you have a lighter, you can use it to fix your candle sinkholes. Hold the flame about six inches away from the surface of the candle and move it around until the wax is melted and smooth. Be careful not to hold the flame too close to the wax, as this could cause it to catch fire. If you want to be extra careful, you can use a spoon or spatula to spread the melted wax around. Try to work quickly, as the wax will harden if it cools too much.

4. Use a Hot Glue Gun 

If you have a hot glue gun, you can use it to fix your candle sinkholes. Simply apply a small amount of glue to the surface of the candle and smooth it out with your finger. The heat from the glue will melt the wax and fill in any holes or indentations.

Simply Apply a Small Amount of Glue

While this method may not be as quick or effective as using a heat gun, it can still get the job done. If you want to be extra careful, you can use a spoon or spatula to spread the melted wax around.

5. Use Boiling Water 

One simple way to fix candle sinkholes is to pour boiling water over them. The heat from the water will melt the wax and smooth out any imperfections. Just be careful not to pour too much water, as this could cause the candle to crack or break. If you want to be extra careful, you can use a spoon or spatula to spread the melted wax around. Try to work quickly, as the wax will harden if it cools too much.

6. Use a Clothes Iron 

If you have a clothes iron, you can use it to fix your candle sinkholes. Simply set the iron on its lowest setting and hold it about six inches above the surface of the candle. Move it around until the wax is melted and smooth. Be careful not to hold the iron too close to the wax, as this could cause it to catch fire or smoke. If you want to be extra careful, you can use a spoon or spatula to spread the melted wax around.

7. Use a Microwave 

Another quick and easy way to fix candle sinkholes is to microwave them. Simply place the candle in the microwave and heat it on high for about 30 seconds. The heat from the microwave will melt the wax and smooth out any imperfections. Although this method may not be as fast or effective as using a heat gun, it can still get the job done. Make sure to use caution when handling a hot candle.

8. Use Crumpled Paper Towels 

If you don’t have any of the other items listed above, you can also use crumpled paper towels to fix your candle sinkholes. Place a few crumpled pieces of paper towel on the surface of the candle and press them down firmly. 

The heat from the paper towels will melt the wax and fill in any holes or indentations. If you want to be extra careful, you can use a spoon or spatula to spread the melted wax around. Try to work quickly, as the wax will harden if it cools too much.

9. Use a Potato 

A simple yet effective way to fix candle sinkholes is to use a potato. Cut off one side of the potato so that it’s flat, then hold it above the candle while gently pressing down. The heat from the potato will melt the wax and fill in any holes or indentations. If you want to be extra careful, you can use a spoon or spatula to spread the melted wax around. Try to work quickly, as the wax will harden if it cools too much.

10. Use an Oven Mitt 

The last method we have for fixing candle sinkholes without a heat gun is to use an oven mitt. Simply place the mitt on the surface of the candle and press down gently. The heat from the mitt will melt the wax and fill in any holes or indentations.

 Use an Oven Mitt

Make sure to use caution when handling a hot candle. If you want to be extra careful, you can use a spoon or spatula to spread the melted wax around. Try to work quickly, as the wax will harden if it cools too much.

Now that you know how to fix candle sinkholes without a heat gun, it’s time to decide which method is best for you. If you have any of the items mentioned above, they are all easy and safe ways to get your candles looking great again! Just be sure to exercise caution when using hot methods like a hair dryer or lighter, as these can cause fire or smoke if used incorrectly.

You Can Check It Out Tell if Scissors Are Left Handed

4 Things to Consider When Fixing Candle Sinkholes without Heat Gun

1. Preparing the Area:

Before making any attempts to fix a candle sinkhole without heat, make sure the area is clean and free of debris. This will ensure you have a smooth surface that’s ready for repair.

2. Patching up the Hole:

To patch up the hole where the wick used to be, use a combination of wax and filler material such as epoxy resin or grout. Apply this mixture in several layers until it is level with the surrounding surface, and let each layer dry before adding more material.

3. Finishing Touches:

Once your patching work has been done, use fine-grit sandpaper to smooth out any bumps or unevenness from the filling material. Then, use a soft cloth to wipe the area and apply a finish such as wax or lacquer to protect your work.

4. Cleaning Up:

After you’ve completed all of the necessary repairs, make sure to clean up any excess material or debris from the surface of your candle sinkhole. This will prevent any further damage from occurring and ensure that your repair job is complete.

How Do You Maintain Candles?

To prevent future sinkholes from forming, you’ll want to take some steps to maintain your candles. One way is to regularly trim the wick, so it never gets too long. 

Regularly Trim the Wick

This will help ensure that the flame stays at a moderate size and won’t heat up too much wax around the wick. Additionally, try not to burn your candles for more than four hours at a time – this will reduce buildup around the wick and keep things looking neat.

By following these steps, you can easily fix candle sinkholes without using a heat gun! With just a few simple tools and techniques, you can make sure your candles look their best and last a long time.

Easily Fix Them Without a Heat Gun

Conclusion

If your candles have sinkholes, there’s no need to despair. You can easily fix them without a heat gun.  Simply clean the area, patch it up with wax and filler material, smooth out any bumps, and apply a finish. 

Additionally, be sure to regularly trim the wick and burn your candles for no more than four hours at a time to keep them looking new. With these tips in mind, you can easily repair sinkholes without needing any intense tools or techniques. 

Thanks for reading our blog post on how to fix candle sinkholes without heat gun! We hope you found it helpful and informative.

You Can Check It Out Nail Trim Without Nail Gun

Photo of author

Enrique Howard

Hi, I am Enrique. I started my professional life as a handyman and did a lot of external and internal repair of home and office with a little bit of electric and plumbing support. I have extensive experience in tools testing such as drilling, turning, milling, and non-conventional machining like EDM. So let me help you on your journey towards becoming an enlightened DIYer with amazing tools that you can use on your project.

Leave a Comment